mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

All Technical Service Bulletins for PROM - Programmable Read Only Memory: > < A/T - Enters `Limp-In' Mode/DTC's Set|Page 2590
Page 3
background image

13.

Using a ballpoint pen, enter the replacement TCM part number (noted in Step 9), your dealer code, and the current date on the Control Module
Label.

14.

Remove the center console side cover to access the TCM. Affix the Control Module Label to the side of the TCM. Then reinstall the console side
cover.

15.

Using a ballpoint pen, enter the replacement TCM part number, this TSB number TSB-96-23-009, your dealer code and the date on the Engine
Compartment Label.

16.

Carefully remove all dirt and oil from the vacant areas shown on the underside of the hood. Affix the Engine Compartment label in the area shown.

All Technical Service Bulletins for PROM - Programmable Read Only Memory: > < A/T - Enters `Limp-In' Mode/DTC's Set|Page 2590